The 201 cylinder design has been around for a hundred years. Its beginnings were as the external cylinder for nightlatches and now also for many rim-mounted deadlatches, deadbolts and deadlocks. In its installed state it can be easily identified by its round 32mm diameter cylinder face with a concentrically off-set barrel which is 14mm in diameter. There will also be a mounting ring/plate around the outside of the 32mm cylinder that varies in size and shape.

Important note - all our 201 cylinders have a solid brass body and face that prevents "fork" attacks. Other 201 cylinders have a heavily extruded lightweight cylinder body with a thin face-cap clipped over the front to give it the appearance of being solid; this makes them vulnerable to "forking", which involves punching a fork-shaped tool through the thin face-cap and then simply twisting the cylinder till the lock opens.

$72.18ea

The 590 cylinder can be easily identified by its oval shape (and is often referred to as an 'oval cylinder'), 18mm wide / 31mm tall with a 14mm round barrel at one end of the oval - usually the bottom, and often has a brand name stamped above it. Depending on the situation there could be a variety of handles, plates and covers around the cylinder. The 590 cylinder is extremely versatile due to an interchangeable 'cam' drive on the back of the cylinder that can be adapted to engage to various mechanisms from mortise locks to electronic keyswitches and high-security bolts, to cupboard locks and even some padlocks. It can always be recognised by the oval measurements above - with one exception - if you can see an 'Astra' brand somewhere on the lock then the cylinder is NOT a 590 cylinder although from the outside it appears exactly the same.

$67.38ea

The 530 cylinder is harder to recognise because the only visible part when it's installed is the 14mm diameter barrel (keyway), the rest of the cylinder body is contained within the lock.
Suits - Lockwood 530 / 930 / 950 range of knobsets and leversets, which are usually recognisable from a 'Lockwood' brand on the latch.

aka teardrop or yoke cylinder. This cylinder design comes in 4 different formats ('lazy' or 'fixed' cam, and, single cylinder (with turn snib) or double cylinder). The 'lazy' cam version suits security screen door locks and the 'fixed' cam version suits mortise locks, usually the Italian-made brands.  It is secured into the lock by a single screw from the edge but often also requires the correct key to remove it from the door.

Double cylinder = PRO2LAZY$115.22
                       = PRO2FIXED $115.22

Single cylinder with Turnsnib = PRO1LAZY $106.30
                                          = PRO1FIXED $106.30

$76.53ea

this cylinder design is used by many deadbolt, leverset and knobset manufacturers, including our own standard range. When installed into the lock, the only visible part is the barrel (keyway), the rest of the cylinder assembly (the brass part pictured) is concealed inside the lock. It's easily distinguished from a 530 cylinder by its 16mm barrel diameter (as opposed to the 530's 14mm diameter)

$76.89ea

this cylinder suits Lockwood's 001 Series (inside), 680 Series patio bolt, 005 Paradigm Deadbolt

Cylinder only - $65.60

• 8mm diameter shackle
• Various shackle clearances - 25mm (pictured), 38mm, 50mm, 75mm
• Various shackle material - Special Alloy, Brass & Stainless Steel
• Shrouded shackle body (as per left image)
• Weather covers - $3.90
• Retention collar, chain & 'D' shackle - $4.90, enables the padlock to be permanently attached to the gate/fence to help stop 'loss' and damage (not available with shrouded body)

Cylinder only - $66.80

• 11.1mm diameter shackle (note - an 11.1mm diameter shackle has twice as much material than an 8mm shackle)
• Various shackle clearances - 25mm (pictured), 38mm, 50mm, 75mm
• Various shackle material - Special Alloy, Brass & Stainless Steel
• Shrouded shackle body (as per left image)
• Weather covers - $3.90, prevents water and dirt from entering keyway
• Retention collar, chain & 'D' shackle - $4.90, enables the padlock to be permanently attached to the gate/fence to help stop 'loss' and damage (not available with shrouded body)

From - $117.20

• 11.1mm diameter 'special alloy' shackle
• Entire padlock body is constructed of hardened steel
• Standard with 25mm clearance shackle. 38mm, 50mm & 75mm clearances available - add $8, $9 & $10 respectively (special alloy only)

From - $132.43

• 11.1mm diameter 'special alloy' shackle
• Entire padlock body is constructed of hardened steel
• Anti-drill protection standard

From - $183.52

• 15mm diameter 'special alloy' shackle
• Entire padlock body is constructed of hardened steel
• Anti-drill protection standard
• Standard with 38mm clearance shackle. 80mm clearance available - add $12

$100.60

• Solid brass body
• Full dual injected plastic jacket
• Stainless shackle

$131.26

• Standard with shrouded shackle body
• Perfect for marine & extreme outdoor conditions

Our standard range of Knobsets, Leversets & Deadbolts are commercial quality and use standard door preparations. The latch has substantially more strength than most other brands and has a double faceplate which often requires more timber removal before fitting.

Options include

• functions - Entrance, Storeroom, & Classroom
• backsets - (distance from edge of door to centre of barrel) 60mm, 70mm, 127mm

Our InVue Camera is ideally suited to function as a covert surveillance camera. It is packaged into an alarm motion detector style housing, with no hint of camera being inside even on up-close scrutiny.
When no power is available, its internal high capacity battery can power the camera for up to 9 weeks in standby mode, and thanks to its ultra low power image processing technology, if, for example, it takes 200 photos per day, every day of the week, the camera will still operate for around 6 weeks! The camera can also be powered (or recharged) from the external mains plug pack or optional solar panel to ensure it is always powered up and on the lookout.

The InVue Camera is a high sensitivity digital surveillance camera that captures high-resolution colour images even in low light conditions when motion is detected within its field of view. The images are stored on a removable SD memory card for easy viewing on a computer or PDA. The camera can also be triggered from a window, door opening, and cash register or alternatively can be configured to capture images on a time-lapse basis. The camera can store up to 65,000 images and will optionally overwrite the oldest images when the memory card is full for ‘set and forget’ operation.

Features and Functions:

• kit includes: InVue cam, viewer software, 3Ah battery, 2GB SD card, USB-to-SD card reader & charger/power supply
• simple 3 step wireless installation for standalone operation
• customised image-capture sequence
• pre-trigger image capture
• image encryption
• time and date stamped images with programmable text overlay
• external trigger input
• flexible scheduler for independent arming and disarming of camera
• time and date stamped event log
• high speed image viewer included with setup software
• digital signature including camera ID, within each image for integrity verification
• can be wired to a power pack or solar panel for constant set and forget operation

Accessories available include

Outdoor weather-proof casing - IP65 rated = $95.00
which allows room for an Extra high capacity battery (9 months stand-by) = $185.00